JIANGSU TISCO SUPPLY CO., LTD
JIANGSU TISCO SUPPLY CO., LTD
Add to Cart
1035 Carbon Steel Round Bars Steel Billet High Carbon Steel Round Bar Billet
Grade 1035 is a standard carbon steel grade for 1035 steel bar as well as wire rod.
1035 round bar may also appear as:
SAE (Society of Automotive Engineers)
SAE 1035 steel bar
AISI (American Iron and Steel Institute)
AISI 1035 round bar
1035 steel bar is most commonly characterized as a medium carbon grade, and as such is a popular “work horse” grade of steel.
1035 steel bar is often supplied in hot rolled, cold drawn, turned & polished, annealed and or coated conditions; both in bar lengths or packaged into wire rod.
1035 steel bar is a relatively low cost, medium strength steel and is common in a wide variety of general purpose applications. 1035 round bar is higher in strength and hardness than low carbon steel and is often used for small parts of moderate strength such as bolts, nuts, studs and parts which are headed or upset.
A common length for 1035 steel bar is 20′, although many mills have the capacity to produce a variety of lengths depending on the diameter and also the end application. 1035 may also be supplied in wire rod form. Typical wire rod size is around 4,000 #. In coil form, it may be packed into a tightly banded coil or can be loaded onto a carrier depending on the customer’s preference
Applications
1035 round bar and wire rod may be used for cold heading / working into fasteners such as screws, bolts and nuts, machined into cold finished components, and/or hot or cold forged into a variety of parts. Depending on the application, it may be rolled into a wide range of diameters. By cold drawing 1035 round bar, it will increase the mechanical properties, improve the size tolerance and enhance the surface. In these conditions, 1035 steel bar may be used in a variety of tools, chain pins, sealing rings, nails, couplings, levers, studs, gears, bolts, rods, pins as well other numerous other types of parts.
Ordering Information for 1035 Steel Round Bars
| Grade | SAE 1035 |
| Order | Minimum order 3MT per size |
| Length | a) 1 To 12 Meters
b) Custom Cut Length or multiple |
| Round Diameter | 23.5 mm to 80 mm |
| Hexagon | 23.5mm to 52.5mm |
| Condition | a) Hot Rolled b) Bright Bar c) Cold Drawn & Polished |
Grade | Chemical composition %: | |||||||
| C | Si | Mn | S | P | Cr | Ni | Cu | |
| C35 | 0.17-0.24 | 0.17-0.37 | 0.7-1.00 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | ≤0.25 |
SAE 1035 Carbon Steel Round Bar Physical Properties
| Physical Properties | Metric | Imperial |
| Density | 7.85 g/cm3 | 0.284 lb/in3 |
| Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation in 100-150 mm(%) | Reduction in Area | Hardness |
| 1020 | ≥380 | ≥210 | ≥25 | ≥50 | ≤111HB |
1. How long will it take to execute my order?
Our normal produce time is 7-15 working days.but we have many models in stock.
2. How much will the shipping cost be?
This will depend on the size and weight of your order and the method of shipping.
3. Do you provide samples?
Yes, we can provide samples . We can send the samples by TNT,DHL, FEDEX, EMS, UPS or to your warehouse
4. Do you have products in stock?
There are 600 tons stock for various size .pls kindly inform us what model you need , we will send stock details to you .
5. Can I visit you?
Sure, Pls let us know if you have a plan to visit our company, we will arrange it for you.